Building the System


This section specifically addresses the programming, installation, and commissioning of a system from bench test procedures, wiring "do's and don'ts", and on to powering up and final testing.

"Bench Programming & Testing" is a phase many have skipped and then found just how costly not doing this phase was. Put another way many have found out just how much work is involved later by leaving out this little bit of work now.

"Wiring up the Bits" is the main physical area where errors occur resulting in an unreliable and high maintenance system.

"Antenna systems" installation and erection, often perceived by many as a 'black art' (not without the prompting of a number antenna suppliers who make loads of money through your fears) is revealed as nothing more than a few choices.

| | Ask a Question |