Joining current leads

Often a requirement exists for extending the current lead of a Power Recorder. What is also often the case is there is a spare current lead and if only the two could be connected to one another then all would be well.

The answer lies in carrying a set of "current lead couplers" in the PQ bag. This takes the 6-pin connector that would be connected to the front of the recorder and converts it back to a 4-pin making it ready for connection to another current lead. Please note this can only be done for a magnetic CT and not a 'Flexi'.

6-pin -  4-pin 6 - 4 5 - 3 4 - 1 2 - 2